| PART |
Description |
Maker |
| AN261 |
DESIGNING WITH THERMAL IMPEDANCE
|
SGS Thomson Microelectronics
|
| E909.01 |
DESIGNING SYSTEMS WITH HALIOS? SWITCH
|
ELMOS Semiconductor AG
|
| AN1517 |
Designing with the STEVAL-ISA089V1 high efficiency DC-DC
|
STMicroelectronics
|
| AN715 |
Designing Low-Voltage DC/DC Converters with the Si9145
|
Vishay
|
| AN703 |
Designing DC/DC Converters with the Si9110 Switchmode Controller
|
Vishay
|
| AN4217 |
Designing the SPV1020 with serial and parallel output configurations
|
STMicroelectronics
|
| AN704 |
Designing DC/DC Converters to Meet CCITT Specifications for ISDN Terminals
|
Vishay
|
| AN701 |
Designing High-Frequency DC-to-DC Converters With the Si9114A Switchmode Controller
|
Vishay Siliconix
|
| AN707 |
Designing Low-Power Off-Line Flyback Converters, using the Si9120 switchmode controller IC
|
Vishay
|
| CMX589AMX909AMX029 |
Using Two-Point Modulation to Reduce Synthesizer Problems When Designing DC-Coupled GMSK Modulators
|
CONSUMER MICROCIRCUITS LIMITED
|
| D1B121000 |
Dip type construction with the same terminal pitch as ICs or TTLs simplifies PC board designing.
|
COSMO[COSMO Electronics Corporation]
|
| AN724 |
Designing A High-Frequency, Self-Resonant Reset Forward DC/DC For Telecom Using Si9118/9 PWM/PSM Controller
|
Vishay
|
